XY9-35-Jiangsu Xinhetai Machinery Group Co., Ltd.

Language

中文版

ENGLISH

Japanese

Win With Quality Win With Trust

Product

XY9-35

Category:

Centrifugal fans and induced draft fans for power stations and industrial boilers

Product description: The enterprise has the ability to produce 1 million single cylinder diesel engine blocks, 300000 multi cylinder diesel engine blocks and 2000 sets of ventilators annually

key word:

keyword:

single cylinder diesel engine body | multi-cylinder engine block | diesel engine

Main products

Product Consulting

Product Description

Uses: It is developed to suit 1t, 2t, 4t / h boilers.

Type: The fan is made of single suction. The machine numbers are №4.5C, 6.3C, 8C, and D. It is equipped with 1t, 2t, and 4t boilers. It can be made into two types of "reverse" and "shun". The position of the air outlet is expressed by the angle of the air outlet of the cabinet. The "reverse" and "shun" can be made into three angles of 0 °, 90 °, and 180 °.

Structure: The fan is mainly composed of a casing, an impeller, an air inlet, a front cover, and a transmission unit (where there is a bracket below №6.3C and an adjustment door above).

1. The induced draft fan impeller has 16 forward curved blades, and the impeller system is composed of 16Mn. After the impeller is formed, it is corrected by dynamic balance. Therefore, the forward rotation is stable and reliable, with high strength and wear resistance, and long service life.

2. The induced fan uses a snail-shaped whole made of ordinary steel plates as the casing.

3. The air inlet is made into a converging fluid-shaped overall structure, and the front cover plate group is bolted to the casing inlet side plate.

4. The adjusting door is made of ordinary steel plate. The blade is a flower-shaped adjusting door. It is a device used to adjust the air volume of the fan. The adjusting range is from 90 ° (fully closed) to 0 ° (fully open).

5. №6.3C induced draft fan bracket is welded by profile steel.

6. The transmission group is composed of a main shaft and a bearing box. The main shaft is made of high-quality steel. The bearing is №6.3C or higher (using air blade secondary cooling, the bearing box above №6.3C is equipped with a stomach copper cooling pipe, and the amount of cooling lubricant is normal. Considering 0.5 ～ 1m3 / h, the bearing box is equipped with a thermometer and an oil level indicator, and the amount of oil depends on the oil mark.

The detailed performance parameters of this product are as follows:

Machine number	Rotating speed(rpm)	Full pressure Pa	flow m3/h	Motor Power kw
5C	2240	2314	5894	5.5
	2240	2265-2226	6610-7902	7.5
	2240	2108	8884	11
6.3C	1800	2452-2393	9474-10626	11
6.3C	1800	2206-2128	14281-15840	15
8C	1600	3199-3040	17245-19324	22
	1600	2961-2814	23116-25992	37
	1450	2501	17528	18.5
	1450	2432-2226	20949-26128	30

Main products

Product Consulting

Submit

Add：No.2, Zhaiqiao North Road, Qianhuang Town, Wujin District, Changzhou City, Jiangsu Province, China
Tel：0086-519-86268556

E-mail：jsxht@jsxht.com